water4gas eu - víz üzemanyag autó Water4Gas main banner water4gas eu - víz üzemanyag autó water4gas eu - víz üzemanyag autó water4gas eu - víz üzemanyag autó
Spare gas, add water! Water is a very useful fuel! You can spare much money! Water4Gas is the simplest way to construct your own device, which will serve the engine of your car! Please read our pages! Buy a book! Be a developer! Best wishes! Our pages may appear different when using MS Explorer, please use Firefox! HybridCar2008AS Team.
Introduction to Water4Gas technology.
2007. december 17. csütörtök 12:33:44
    Facebook/Twitter/Google+ >>>
<<< Facebook/Twitter/Google+    
Dear our friends! The water4gas-eu.com domain is sleeping silently now. We presents some pages of our website here, It is for those people who have never heared abot this technology. Our domain is suspended temporary, we have not decided to keep it or we shall cancel it forever. Anyway we greet our old friends and nwe friends too. Hybridcar2008AS Team
water4gas - waterhybrid car - waterfuel Welcome! Have you ever heard about a car, which runs on water? Yes? O.K. So have We. Maybe you have spent your vacation at a riverside or seaside and you have seen such cars above the water hovering over the golden bridge of the sunset? Unfortunately it was a dream only. We have never seen such car! 100% water cars are still on the drawing board - but we are excited to show you how you can start RIGHT NOW to... Convert Your Car to BURN WATER as well as Gasoline - to Double Your Mileage! Of course we do not mean that you'll be able to stop at the seaside and fill the content of the ocean into your car instead of gasoline (like you can see it in the picture on the left side...).

Waterfuel cannot be used as the only energy source in your car at this moment. But you can add water to fuel and you can improve your engine power with a very simple solution. This solution is called Water4Gas. HybridCar2008AS Team intends to introduce Water4Gas solution to you at this internet site. Please remember: Water is additional only! (and not exactly water, but GAS)
There is an existing Do-It-Yourself kit, very affordable (under $200) and EASY technology, which allows you to convert your car to a water-burning car! Water is supplemental to gasoline - It boosts fuel economy by approx 100% ( or more than double the mileage). In other words, now more than half the energy comes from water! It boosts performance while preventing smog. We are about to tell you about a SIMPLE technology you can have right now, called Water4Gas. It's one of the most PRACTICAL free-energy devices, marked by extraordinary simplicity and effectiveness.

Wait before you say that it is impossible! HybridCar2008AS Team presents evidences on www.water4gas-eu.tk website. We try to find the truth! If you have any experiences in connection with Water4Gas, please let us know! You may send email to water4gas.eu@gmail.com about your positive or negative experiences. If you have questions please find answers of frequently asked questions at our FAQ page. (If your question is not answered we are pleased to answer it in email.)

Basic question: What does Water4Gas mean?

Water4Gas is a collection of different fuel sparing technologies. Water4Gas name covers different devices, fuel additives and other tricks. Its most famous element is a device, which is called Electrolyzer or Water4Gas HHO unit. This device will be introduced in more detail later on this page. Let's see what kind of technologies belong to Water4Gas: (not a full list)

Water4Gas HHO device: This is a gas generator. It generates Hydrogen and Oxygen using water and electricity of the battery. This device can be considered as a base unit of all other Water4Gas technics. (See later.)
Water4Gas H2O device: This is a vapor generator. This unit is also called Vaporizer because it is a simple unit, which adds vapor to the air-fuel mixture. This Water4Gas device is very simple but despite of this fact it is surprisingly efficient.
Charged Water System: Charged water is a tricky mixture. This method unifies the advantages of Electrolyzer and Vaporizer. It can be used as a very efficient way of fuel sparing in case of engines with carburetor. This method is fully described in Water4Gas Books. A full chapter describes this method.
Fuel heater: This device works as its name say. It heats fuel. Very simple solution, easy to construct and easy to use. It improves fuel burning efficiency.
Sensor Enhancers: These devices can modify different signals of different sensors of the car. They must be used in case of Electronic Fuel Injection systems. Generally these devices can be called EFIE, Electronic Fuel Injection Enhancer. There are three types of sensors, which can be modified this way: MAP Sensor, MAF Sensor and Oxygen Sensor. This Water4Gas technology is very important in modern vehicles, but it must not be used without any water based element of Water4Gas.
Fuel additives: There are different fuel additives at the gas stations too. Why is it a Water4Gas "technology"? Those additives are expensive. You can make your own mixture at home at low costs. You can find several tricks to create your mixture in one of Water4Gas Books.

It should be emphasized that it is not a complete list of Water4Gas methods and devices. You can find a complete list in the Water4Gas Books. There are two books: User Manual and Gas Saving Techniques. You can purchase these books from the bottom of this page.

Water4Gas basic device and theory:

water4gas - waterhybrid car - jar As it was mentioned, the most famous Water4Gas device is the HHO generator. When somebody mention Water4Gas, she/he usually means this device.

You can see a very simple device in picture left, this device use a little electricity out of your car's battery, to separate water into a gas called HHO (2 Hydrogen + 1 Oxygen). HHO, also called Brown's Gas or Hydroxy, burns beautifully and provides TONS of energy - while the end product is just WATER!

Can I generate "free energy" in my car? You can! But how? Miracles? No. You generate free energy by ENHANCING the EFFICIENCY of your poorly designed engine!!! Your engine uses 20% of the energy stored in that expensive gasoline - and WASTES 80% for heat, pollution (unburned fuel!) and vibration. Reducing waste with this technology = "free energy" for you! This is solved by Water4Gas technology!

Water4Gas technology is good for carburetor/fuel injection, gas/diesel. Old/new cars, light trucks. It is easy to install & maintain. Water4Gas technology provides you with a great ENTRY-LEVEL solution you can install in a few minutes without engine modifications.
This device is different to the original Water4Gas HHO device. It has been modified according to the experiences of the Hungarian experimenters. It has no bubbling and safety valves. We think that those valves are not neccessary for this device and we experienced that those valves had caused troubles only. Of course Vaporizer must have bubbling valve according to its functioning. These devices need an approximately 1 liter (1 quart) size jar.
water4gas - waterfuel - airflow How to install Electrolyzer? Figure on the left side show the simplicity of Water4Gas technology. It's very simple. You don't change your engine or computer. A quart-size (95O cc) container is placed somewhere under the hood. You fill it with DISTILLED WATER and a little bit of BAKING SODA. The device gets vacuum and electricity (12 Volts) from the engine, and produces HHO gas (Hydrogen+Oxygen). The HHO gas is supplied to the engine's intake manifold or carburetor as shown left. (Our latest experiences show that single connection usually better than dual connection.)

This design is simple, effective and safe. Don't worry, you will get full instructions and diagrams that make it simple and clear. It takes a couple of minutes to connect. (Diesel installation is much simpler! Even if you have a Turbo Charger. Ignore the turbo and connect the HHO hose somewhere between the air filter and the turbo or the intake manifold! Diesel installation needs only one brach of HHO flow.)
water4gas - waterfuel - switching diagram The electrical connection is very simple - the need to use relays or any other complications have been eliminated. The device connects to the 12 Volts of your battery via the ignition switch, to prevent hydrogen production when the engine is off. The device is fuse protected and draws very little current, only 1-3 Amps! This takes 10 minutes or less to connect.  Due to unique design - stainless steel SPIRALS rather than PLATES - Water4Gas produces HHO gas for less electric power out of your battery (compared to older technology based on stainless steel plates). The spirals are also very easy to make BY HAND, compared to the plates that require expensive machinery to cut and process. (Vaporizer and Charged Water System need no electricity, so their installation is easier.)
Water4Gas real installations.
water4gas - real installation 1 water4gas - real installation 2 water4gas - real installation 3 water4gas - real installation 4
You can see two real installation in the pictures above. Two pictures about a Water4Gas HHO device (Electrolyzer) installation on the left side and two pictures about Water4Gas H2O device (Vaporizer) installation on the right side. Clicking on these pictures you can go to our reports page, which contains more information about different installations.
Water4gas HHO device installed in Toyota Land Cruiser. Any Water4Gas device, which have been installed makes the engine quiet, calm. The engine stops knocking or "pinging". The water changes the combustion cycle and makes it more even or "round". This happens immediately upon installation, and from that moment on, your engine works in a new way. The effect is not only less noise, it's also less vibration, resulting in reduced strain on the transmission (thus smoother gear shifts), cleaner pistons and valves, and generally better engine operation. According to our experiences Water4Gas cleans spark plugs in a very efficient way.

Water cools down the engine. For years, heavy trucks have been using water injection systems that cost up to $15,000 to cool their engines. Truck owners are very sensitive to maintenance expenses and they know from years of experience that water reduces their breakdowns and overall operating costs. Water4Gas does the same - affordably.
Water4gas HHO device in Toyota Land Cruiser. Water4Gas system widens the torque range and makes the vehicle accelerate faster. After acceleration, you don't have to press the gas pedal as much to keep going. AND REMEMBER! May extend your mileage with 100%!

You can see a Water4Gas installation in a Toyota Land Cruiser in the pictures left. This vehicle has a 4200 cc turbo diesel engine therefore it was not enough to install a single cell Water4Gas HHO device in it. You can connect more number of Water4Gas cells to each other. This way the cells' efficiency is improved.

According to our experiences Water4Gas works very efficiently in diesel cars. Moreover it is easier to install this system in a diesel car than in other cars. This solution works both in case of turbo diesels and "normal" diesels. No need for electronic devices to modify different sensors' signals!
O.K. I have read your page! Moreover I have read your FAQ and Reports pages! I think that I could understand the essence of this unique technology and I guess that I am ready to construct my device. My only question is:

Why should I buy Water4Gas Books?

Water4gas HHO device. Oh yes! You may see this picture on the left and you may duplicate this device. You need only a coffee jar - if you are a coffee drinker you may have at home - some plastic material as a tower, some wires, screws, nuts, wingnuts and an elbow like pipe. Why do you need anything else?

  • Hybridcar2008AS Team began to deal with Water4Gas solutions in February, 2008. We have not read Water4Gas books, we have read only Ozzie's website. Tony (our member) began to translate these books at the beginning of March. Comparing our own work and the translation we realized that we had made many mistakes. Why?

  • There are much additional information in Water4Gas Books. These information must be read before constructing or using Water4Gas device. The exact manufacturing information may differ from your imagination. Maybe you are an engineer and you may say that you can construct it on your own, but it is better to read about preliminary experinces and about construction.

  • Installation and fine tuning is another question. Although you may say that this is a clear fact for you, we missed fine tuning for the first time. Our imaginations were absolutely different to Ozzie's advices. We could achieve more fuel consumption for our surprise. If you do not read Water4Gas Books you may do the same failures as we have done.

  • You have to understand that the Water4Gas device is not a solution itself. The solution is a complex system, which have to be understood in its all part. Its complexity consists of different devices and the application methods of these devices. Books are keys, keys of your own solution. After reading them, you may design your own solution.

  • Copyright © HybridCar2008AS Team
    Many thanks to www.hostinger.hu for the free space on the internet.
    Kostenlos und effektiv werben

    Free web hostingWeb hosting